YOUR #1 RETAILER OF LOCKERS & MAILBOXES

Hallowell Safety-View Steel Locker — 2 Tier, 3 Wide USV3228-2 YourLockerStore

Safety-View Metal Locker — 2 Tier, 3 Wide

Vendor Hallowell # USV3228-2PT
IN STOCK
Sale price
$683.54
Regular price
$1,518.98   Save 55%
Unit price
per 
*U.S. WIDE DELIVERY

Availability:

    • Model: Hallowell Double Tier Safety-View 'Windowed' Wardrobe Lockers
    • Type: Provides a secure storage solution with patented polycarbonate doors allowing a clear view of contents
    • Application: Ideal for industry, retail, offices and recreational facilities where a view of the locker contents is necessary
    • Color: Tan
    • Body Construction: 24 gauge steel
    • Door: 16 gauge steel with two high strength injection molded polycarbonate panels per door for easy content viewing
    • Hinges: Continuous piano type
    • Handle: Stainless steel recessed handle with multi-point gravity lift-type latching. Recessed handle protects finish from being marred by padlock.
    • Hooks: One double prong ceiling hook and two single hooks per opening
    • Legs: 6" high legs are standard. Lockers without legs are available for a nominal charge.
    • Safety: Meets UL flammability standards. Polycarbonate is approved by the Consumer Product Safety Commission.
    • Appearance: All lockers include matching body colors. Order Finished End Panels for exposed row ends if desired. Finished End Panels install over top of universal side panels adding strength and rigidity at exposed row ends and can be ordered to match locker door/frame color.
    • Plates: Aluminum number plates are black with silver etched numerals and include mounting hardware

      *Actual product color may vary from the images shown. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.
      • General: Lockers shall be ''HALLOWELL Safety-View KD Wardrobe Lockers'' as manufactured by List Industries Inc. or approved equal.  Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion.  Make all exposed metal edges safe to touch.  Weld frame members together to form rigid, one-piece structure.  Weld, bolt, or rivet other joints and connections as standard with manufacturer.  Grind exposed welds flush.  Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle.

        Lockers shall be GREENGUARD Gold Certified

        Finishing:  All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Stock color is #729 Tan.

        Frame:  Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members.  Cross frame members of 16 gauge channel shapes, including intermediate cross frame members on double and triple tier (frames with doors 20" high and higher) lockers shall be securely welded to the vertical framing members to ensure rigidity.  Rubber bumpers shall be provided to cushion door closing.

        Safety-View Wardrobe Doors:  Doors 20" high and over to be fabricated from single sheet prime 16 gauge (18 gauge for doors 9" wide) with single bends at top and bottom and double bends at the sides.  The channel formed by the double bend at the latch side is designed to fully conceal the lock bar. Doors shall include two clear see-thru polycarbonate panels securely attached to the inner door face located above and below the recessed handle using a full perimeter welded retainer.  The see-thru door panels shall consist of a clear, polished surface, ultraviolet-stabilized polycarbonate not less than 1/8” thick to meet building code requirements for a CC-1 rating and be listed with the Underwriters Laboratories for the UL flammability standard and the UL972 standard for burglary resistant glazing materials.  Polycarbonate must be approved for Consumer Product Safety Commission (CPSC 16CFR 1201) Categories I & II and ANSI Z97.1-1984 Safety Glazing Standards.  Doors shall be Plain (non-louvered).

        Stainless Steel Recessed Locker Handle:  All wardrobe doors shall have recessed deep drawn not less than 304 stainless steel handle shaped to receive a padlock or built-in combination lock.  The recess pan shall be deep enough to have the lock be flush with the outer door face. 

        Latch Assembly:  The latching mechanism for wardrobe doors shall be finger lift control type constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull.  Spring activated nylon slide latches shall be completely enclosed in the lock channel allowing doors to close with the lock in the locked position.  Lock bar shall be hot dip galvanized and installed after paint to ensure proper paint coverage and locker bar operation.  Locking devise shall be designed for use with either built-in combination locks or padlocks.  Latch hooks shall be securely welded to the vertical frame channel on the strike side to engage the nylon slide latches.  Three latch hooks for doors 48" and higher, two latch hooks for doors under 48" high.

        Door Hinges:  Shall be not less than 16 gauge continuous piano type hinges riveted to the frame and welded to the door.  All doors to be right hand, side hinged.

        Body:  Fabricate back and sides of 24 gauge (minimum) sheet steel, with double flanged connections extending full height.  Form top, bottom and intermediate tier dividers of 24 gauge (minimum) sheet steel with single return bends at all sides. Bolt top and bottom as well as horizontal tier dividers of wardrobe openings to front horizontal frame members at not less than one place in addition to side panels.  Form hat shelves at 60” and 72” high single tier lockers of 24 gauge (minimum) sheet steel with single bends at sides and back and a double bend at front.

        Locks (if required):  Shall be master-keyed to one system for the entire project.  (See lock use chart for suggested lock application)

        Equipment:  Furnish each locker with the following items, unless otherwise shown.

      • Single Tier Lockers: Openings 60” and 72” shall include one hat shelf, one double prong ceiling hook and a minimum of two single prong hooks.
      • Double Tier Lockers: Openings 30” and 36” high shall include one double prong ceiling hook and a minimum of two single prong hooks.
      • Triple Tier Lockers: Openings 20” and 24” high shall include one double prong ceiling hook only.

        Two-Year Warranty:
          HALLOWELL KD lockers are covered against all defects in materials and workmanship excluding finish, damage resulting from deliberate destruction and vandalism under this section for a period of two years.
  •  Documents