Traditional Metal Locker — 1 Tier, 1 Wide

Description

• Model: ASI Single Tier Traditional Collection Powder Coated Metal Locker
• Type: Visually appealing and very durable, this all-purpose wardrobe locker unit with louvered doors is designed for storage of all personal belongings
• Application: Comes with standard features and offers the most value for typical locker applications making it ASI's most widely distributed locker line
• Colors: 15 designer colors are available, including 6 quickship colors: almond, black, gray, blue frost, charcoal, and white
• Finish: 2 mil powder coated in any of 15 designer colors
• Body Construction: 16 gauge louvered doors, frames, and bottoms; 24 gauge tops, sides, backs, and shelves
• Hinges: Continuous full-length staked piano hinge for security
• Handle: Stainless steel recessed handle for safety
• Hooks: 3 wall hooks are included per frame PLUS a ceiling hook (12" & 15" D units) or a coat rod (18" D units)
• Coat Rod: Only included with 18" D units
• Shelf: Included
• Doors: Rubber door silencers for quiet operation
• Legs: 6" H legs are included
• Plates: Polished aluminum number plate riveted to door face with black numerals ½” high. Default numbering sequence is #1 and up. If a special numbering sequence is required, please enter your desired sequence within the text box available at checkout.
  
  *Due to variances among color monitors the colors that appear on your screen may not be exact. If color is important you must request samples prior to ordering. Colors are subject to change without notice.

Specifications

GENERAL

• 1.01 - Work Included:
  A. The lockers shall be powder-coated steel as manufactured by ASI Storage Solutions, Eastanollee, GA 30538.
  B. Furnish all labor and materials for completion of work in this section as shown in the approved drawings and specifi ed herein.
  
  

PRODUCT

• 2.01 - Material: All major steel parts shall be of mild cold rolled commercial quality steel.
• 2.02 - Finish: All material shall be power washed and phosphate treated for maximum fi nish color adhesion.  All components shall be fi nished with a 2 mm hybrid epoxy/polyester powder, electrostatically applied to ensure uniform thickness and baked to cure.
• 2.03 - Construction: All lockers shall be built on a unit principle with common intermediate uprights separating units.
• 2.04 - Door Frames: Shall be 16 gauge formed in a channel shape.  Vertical members shall have additional fl ange to provide a continuous door strike.  Cross frame members shall also be 16 gauge channel shaped, including intermediate cross frames on double and triple tier lockers.
• 2.05 - Doors: Shall be 16 gauge, with louvers for ventilation channel shaped on both the lock  and hinge side, with angle formations across the top and bottom.
• 2.06 - Body: Bottoms shall be 16 gauge. Tops, sides, backs and shelves shall be 24 gauge.  Bolt spacing shall not exceed 9” o.c.
• 2.07 - Hinges: Shall be full length 16 gauge continuous piano type riveted to both door and frame.
• 2.08 - Handles: Shall be one-piece 20 gauge deep drawn stainless steel cup designed to accommodate locks.
• 2.09 - Latching: On single, double, triple, and two person lockers the lifting trigger shall be 14 gauge steel, attached to the latching channel.  The trigger shall have a padlock eye for use with 9/32” diameter padlock shackle.  Doors to have latch clip engaging frame at three points on doors over 42” high and two points on all other doors.  Locking device to be positive automatic type, whereby locker door may be locked when open, then closed without unlocking.  A rubber silencer shall be fi rmly secured to the frame at each latch hook. Four, fi ve and six tier lockers shall have an 11 gauge frame hook secured to the frame.  The frame hook shall have a padlock hasp protruding through the recessed handle.
• 2.10 - Interior Equipment: Single tier lockers 48” or higher shall have a shelf.  If under 18” deep, locker shall have three wall hooks and one ceiling hook.  Single tier lockers 18” deep or more shall have a coat rod instead of  a ceiling hook.  Double tier lockers shall have three wall hooks and one ceiling hook.  Triple tier lockers shall have three wall hooks for 12’’ and 4 wall hooks for 15’’ and wider lockers.
• 2.11 - Number Plates: Each locker shall have a polished aluminum number plate riveted to door face with black numerals ½” high.
• 2.12 - Color: Doors and exposed body parts shall be selected from ASI’s standard designer color range.  Non-exposed body parts shall be fi nished in #03 Almond.
• 2.13 - Assembly: All locker components shall be assembled by use of rivets.
  
  

EXECUTION

• 3.01 - Installation: Lockers shall be installed in accordance with ASI’s installation instructions and shall be level and plumb with fl ush surfaces and rigid attachment to anchoring surfaces.

Downloads

• Assembly Instructions
• Care & Cleaning
• Specifications
• Technical Data Sheets
• Warranty